Notes on Removing and Installing Ear Hose Clamps

32 11 ... - Notes on removing and installing ear hose clamps





Special tools required:
- 32 1 260 32 1 260 Pliers





Note:
The working steps are described by way of the example of selected components.

1-ear clamps can be reused.





To remove an ear hose clamp, place special tool 32 1 260 32 1 260 Pliers at right angles to ear and cut ear open.





The eye hose clamp can be fitted not only axially but also radially after the hook fastener has been opened.





Attach hook fastener and press eye together with special tool 32 1 260 32 1 260 Pliers.





Side cutter of special tool 32 1 260 32 1 260 Pliers can be used in areas which are difficult to access.





Important!
Gap (A) max. 1 mm!