Audio Control Module (ACM)

Audio Control Module (ACM) - Fusion, Milan

NOTE: Without navigation shown, with navigation similar.











Removal and Installation

NOTE: It is not necessary to remove the Audio Control Module (ACM) to retrieve the part number. For additional information, refer to Audio Control Module (ACM) Self-Diagnostic Mode Audio Control Module (ACM) Self-Diagnostic Mode.

All vehicles

1. NOTE: Module configuration is required when a new ACM is being installed.

Upload the ACM configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in Module Configuration Programmable Module Installation (PMI).

Vehicles with navigation

2. Remove the Front Display Interface Module (FDIM). For additional information, refer to Front Display Interface Module (FDIM) - Fusion, Milan Front Display Interface Module (FDIM).

Vehicles without navigation

3. Remove the instrument panel center finish panel. For additional information, refer to Instrument Panel and Console Instrument Panel Finish Panel - Center.

All vehicles

4. NOTE: For vehicles with navigation, the 2 upper screws were removed with the FDIM.

Remove the 4 screws (2 for navigation) and the ACM.

- Disconnect the electrical connectors.

5. To install, reverse the removal procedure.
- Download the ACM configuration information from the scan tool. For additional information, refer to PMI in Module Configuration Programmable Module Installation (PMI).