Air Cleaner Outlet Pipe

Air Cleaner Outlet Pipe

Removal and Installation

All-Wheel Drive (AWD) vehicles

1. Disconnect the vacuum hose from the Air Cleaner (ACL) outlet pipe.

All vehicles

2. Disconnect the crankcase ventilation tube-to-ACL outlet pipe quick connect coupling. For additional information, refer to Fuel System - General Information Quick Connect Coupling.

3. Loosen the ACL outlet pipe-to-Throttle Body (TB) clamp.
- To install, tighten to 4 Nm (35 lb-in).

4. Loosen the ACL outlet pipe-to-ACL housing cover clamp.
- Remove the ACL outlet pipe.

- To install, tighten to 4 Nm (35 lb-in).

5. NOTE: The ACL outlet pipe should be securely sealed to prevent unmetered air from entering the engine.

To install, reverse the removal procedure.