Crankshaft Rear Seal

Crankshaft Rear Seal









Removal

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the flexplate. For additional information, refer to Flexplate Removal and Replacement.

3. Using the Slide Hammer and the Crankshaft Rear Oil Seal Remover, remove and discard the crankshaft rear oil seal.





Installation

1. NOTE: Clean all sealing surfaces with metal surface prep.

NOTE: Apply clean engine oil to the seal lip and seal bore before installing the seal.

Using the Crankshaft Rear Main Oil Seal Installer Bolts and the Crankshaft Rear Main Oil Seal Installer, install the crankshaft rear oil seal.





2. Install the flexplate. For additional information, refer to Flexplate Removal and Replacement.