Roof Opening Panel Frame

Roof Opening Panel Frame

Removal and Installation

1. Remove the headliner. For additional information, refer to Interior Trim and Ornamentation Service and Repair.

2. Disconnect the 4 roof opening panel drain hoses.

3. Disconnect the electrical connector.

4. Remove the 8 roof opening panel frame bolts and remove the roof opening panel frame.
- To install tighten to 12 Nm (106 lb-in).

5. To install, reverse the removal procedure.
- Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization Programming and Relearning.