Canister Vent Valve: Service and Repair

Fill Limiting Vent Valve









Removal and Installation

1. Remove the fuel tank. For additional information, refer to Fuel Tank and Lines Fuel Tank.

2. Release the clamp and disconnect the fuel vapor tube assembly-to-fill limiting vent valve hose.

3. NOTE: Be careful when removing the fill limiting vent valve from the fuel tank grommet to avoid damaging either component.

Remove the fill limiting vent valve from the tank.

4. To install, reverse the removal procedure.
- Carry out an Evaporative Emission System Leak Test. For additional information, refer to Evaporative Emission System Leak Test Testing and Inspection.