Antenna Cable: Service and Repair

Antenna Lead-In Cable









Removal and Installation

1. Remove the audio unit. For additional information, refer to Audio Unit Service and Repair.

2. Remove the RH lower instrument panel insulator.

1. Remove the pin-type retainers.

2. Release the locking tab.

3. Remove the insulator.

- Disconnect the courtesy lamp.





3. Disconnect the antenna lead-in cable.

4. Disengage the antenna lead-in cable pin-type locator retainer.





5. Remove the 3 retainers and the antenna lead-in cable.

6. To install, reverse the removal procedure.