Audio Control Module (ACM)

Audio Control Module (ACM)









Removal and Installation

NOTE: If installing a new navigation Audio Control Module (ACM), remove the navigation map DVD, if possible, before sending the ACM to an authorized audio system repair facility.

1. NOTE: Module configuration is only required if a new ACM is being installed.

Upload the ACM configuration information to the scan tool.

2. Remove the instrument panel center finish panel.

3. Remove the 4 screws and the ACM.
- Disconnect the electrical connectors and the antenna lead-in cable.

4. To install, reverse the removal procedure.
- Download the configuration information to the ACM.