Exhaust Y-Pipe

Exhaust Y-Pipe

Removal and Installation

1. NOTE: Always install new fasteners and gaskets. Clean flange faces prior to new gasket installation to make sure of correct sealing.

With the vehicle in NEUTRAL, position it on a hoist.

2. Remove the 2 exhaust Y-pipe-to-intermediate pipe nuts.
- Discard the nuts and gasket.

- To install, tighten to 40 Nm (30 lb-ft).

3. Remove the 2 exhaust Y-pipe-to-LH catalytic converter nuts, the 2 exhaust Y-pipe-to-RH catalytic converter nuts, and the Y-pipe.
- Discard the nuts and gaskets.

- To install, tighten to 40 Nm (30 lb-ft).

4. To install, reverse the removal procedure.
- Install new gaskets and nuts.

5. Start the engine and check for exhaust leaks.