Air Bag Deactivation Indicator: Service and Repair

Passenger Air Bag Deactivation (PAD) Indicator

NOTE: Fusion/Milan shown, MKZ similar.










NOTE: A DTC will set in the Restraints Control Module (RCM) if the Passenger Air Bag Deactivation (PAD) electrical connector is disconnected with the ignition ON. The RCM memory must be cleared before releasing the vehicle.

1. Turn the ignition OFF and wait one minute.

2. Remove the instrument panel center trim panel.

3. Disconnect the PAD indicator electrical connector.

4. Release the 4 locking tabs (2 upper and 2 lower) and remove the PAD indicator assembly.

5. To install, reverse the removal procedure.