Trough Assembly

Trough Assembly

Removal and Installation

1. Remove the roof opening panel glass. For additional information, refer to Roof Opening Panel Glass Roof Opening Panel Glass.

2. Remove the trough assembly.
- Pull the trough assembly arms outward to release the trough assembly guide arm pins from the roof opening panel frame to remove.





3. To install, reverse the removal procedure.
- Verify that the roof opening panel glass is centered and aligned before tightening the roof opening panel glass screws. For additional information, refer to Roof Opening Panel Alignment Roof Opening Panel Alignment.

- Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization Programming and Relearning.