Auxiliary Input / Output Jack: Service and Repair

Audio Input Jack

NOTE: Stowage bin door shown removed for clarity.

NOTE: Vehicle with the SYNC system shown, others similar.

NOTE: Fusion, Milan shown, MKZ similar.










Removal and Installation

1. Open the floor console stowage bin door.

2. Using a suitable tool, remove the audio input jack bezel by prying straight back (Fusion, Milan) or straight up (MKZ).
- Disconnect the Universal Serial Bus (USB) cable and port, if equipped.

3. Release the tabs and remove the audio input jack.





4. To install, reverse the removal procedure.