Test W: LFC 55 DTC C2200 - Front Passenger's Seat Track Position Switch Circuit Fault

PINPOINT TEST W: LFC 55 DTC C2200 - FRONT PASSENGER'S SEAT TRACK POSITION SWITCH CIRCUIT FAULT

Normal Operation
The restraints control module (RCM) monitors the passenger seat track position sensor circuits. If the RCM detects an open circuit or a short to battery on the passenger seat track position sensor, it will store DTC C2200 in memory and send a message to the instrument cluster module to flash a LFC 55 (or higher priority code if one exists) on the air bag warning indicator.

NOTE: When monitoring fault and/or resistance PIDs with the scan tool, it may take up to 2 seconds for the scan tool display to update.

- DTC C2200 Front Passenger's Seat Track Position Switch Circuit Fault - If the RCM detects an open or short to battery on the passenger seat track position sensor circuit for greater than 2.5 seconds, it will set this DTC.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- RCM

W1-W2:

W2-W4:

W4-W7:

W7 Continued: