Test S: LFC 15 DTC C1414 - Incorrect Module Design Level

PINPOINT TEST S: LFC 15 DTC C1414 - INCORRECT MODULE DESIGN LEVEL

Normal Operation
The restraints control module (RCM) monitors communication messages from the occupant classification system (OCS) for an embedded vehicle ID. If the RCM detects an unexpected condition or code from the OCS, it will store DTC C1414 in memory and send a message to the instrument cluster module to flash a LFC 15 (or higher priority code if one exists) on the air bag warning indicator.

NOTE: When monitoring fault and/or resistance PIDs with the scan tool, it may take up to 2 seconds for the scan tool display to update.

- DTC C1414 Incorrect Module Design Level - If the RCM detects software and hardwired VID combination that does not match at start-up, it will set this DTC.

This pinpoint test is intended to diagnose the following:
- Incorrect OCS for vehicle
- Incorrect RCM for vehicle

S1:

S2-S7:

S7 Continued: