Test E: The Door Lock Control Switch Illumination Is Inoperative

PINPOINT TEST E: THE DOOR LOCK CONTROL SWITCH ILLUMINATION IS INOPERATIVE

Normal Operation
When the accessory delay relay energizes, voltage is supplied to the door lock control switches through circuit CBP41 (BU), turning on the switch illumination. Switch illumination is grounded through circuits GD133 (BK) and GD148 (BK/YE).

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Door lock switch

E1-E2:

E2 Continued: