Test A: Shift Solenoids

PINPOINT TEST A: SHIFT SOLENOIDS

Pinpoint Tests - Non OSC Equipped Vehicle

Special Tool(s):

Any time an electrical connector or solenoid body is disconnected, inspect the connector for pin condition, corrosion and contamination. Also inspect the connector seal for damage. Clean, repair or install a new connector as required.

Prior to carrying out the pinpoint tests, check the following:
^ Transmission fluid level.
^ Transmission fluid condition (burned, metal particles or discolored).
^ Engine cooling system.
^ Other non-related transmission DTCs.

A1-A2:

A2 (Continued)-A4:

A4 (Continued)-A5:

A5 (Continued):

A5 (Continued)-A6: