Test V: DTC B2792 - Cross Link Between Firing Loops
PINPOINT TEST V: DTC B2792 - CROSS LINK BETWEEN FIRING LOOPSLamp Fault Codes (LFCs)
The following LFC indicate the specific fault associated with DTC B2792:
Normal Operation
The restraints control module (RCM) monitors all deployable devices for a cross link fault between circuits. If the RCM detects a short between any of the deployable circuits, it will store a diagnostic trouble code B2792 in memory, flash LFC 12-11 on the air bag warning indicator.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- RCM
V1:
V1 Continued:
V1-V2:
V2-V3:
V4-V5:
V5-V6:
V7-V8:
V8-V9:
V10-V11:
V11-V12:
V13-V14:
V14-V15:
V16-V17:
V17-V18:
V19-V20:
V20-V21:
V22-V23:
V23-V24:
V25-V26:
V26-V27:
V28-V29:
V29-V30:
V31-V32:
V32-V33:
V34-V35:
V35-V36:
V37-V38:
V39:
V39 Continued:
