Test L: DTC B2295 - Restraint System - Side Airbag Fault

PINPOINT TEST L: DTC B2295 - RESTRAINT SYSTEM - SIDE AIRBAG FAULT

Lamp Fault Codes (LFCs)
The following LFCs indicate the specific fault PIDs associated with DTC B2295:







Normal Operation
A seat side air bag module provides protection of the thorax area (between the neck and abdomen) of the body.

The restraints control module (RCM) monitors all seat side air bag module circuits for faults. The RCM will set a DTC if a short to battery, open or short to ground fault is detected. The RCM will also set a DTC if the loop resistance is less than 0.9 ohm or greater than 5.0 ohms. If the RCM detects one of the following faults on any of the seat side air bag circuits, it will store DTC B2295 in memory and, depending on the fault, flash a LFC on the air bag warning indicator.







This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Seat side air bag module
- RCM

L1:

L2:

L3-L4:

L4-L6:

L6-L8:

L8-L9:

L10-L11:

L11-L12:

L13-L15:

L15-L16:

L17-L18:

L18 Continued: