Test J: DTC B2292 - Restraint System - Seatbelt Pretensioner Fault

PINPOINT TEST J: DTC B2292 - RESTRAINT SYSTEM - SEATBELT PRETENSIONER FAULT

Lamp Fault Codes (LFC)
The following LFCs indicate the specific fault PIDs associated with DTC B2292:







Normal Operation
The safety belt retractor pretensioners are activated by the restraints control module (RCM) to remove excessive slack from the safety belt webbing when an impact exceeding preprogrammed limits is detected.

The RCM checks all of the safety belt retractor pretensioners for faults. If the RCM detects one of the following faults on any of the safety belt retractor pretensioner circuits, it will store DTC B2292 in memory and, depending on the fault, flash a LFC on the air bag warning indicator.







This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Pretensioner
- RCM

J1:

J2-J3:

J3-J4:

J5-J6:

J7-J8:

J9-J11:

J11-J13:

J13-J15:

J15-J17:

J18-J19:

J19 Continued: