Rear Door: Adjustments

DOOR ALIGNMENT - REAR

All alignments
1. Loosen the door latch striker.

In and out, up and down alignment
2. Loosen the 4 door hinge-to-door bolts.







3. Align the door to specifications.
4. Tighten the 4 door hinge-to-door bolts to 30 Nm (22 lb-ft).

Fore and aft alignment
5. Remove the front and rear door scuff plates and position aside the lower B-pillar trim panel.
6. Loosen the 4 door hinge-to-body nuts.







7. Align the door to specifications.
8. Tighten the 4 door hinge-to-body nuts to 30 Nm (22 lb-ft).

All alignments
9. Adjust the door latch striker. For additional information, refer to Striker Adjustment. Adjustments