Test G: DTC C1920 - LED #1 Circuit Failure and B2373 - LED #1 Circuit Short to Battery

PINPOINT TEST G: DTC C1920 - LED #1 CIRCUIT FAILURE AND B2373 - LED #1 CIRCUIT SHORT TO BATTERY

G1:

G2-G5:

Normal Operation
The parking aid system is enabled when the ignition switch is in the RUN position and the transmission is in REVERSE (R). The system can be disabled by the parking aid switch. The parking aid module sends a signal to the LED over circuit 1436 (VT/OG) when the switch is pressed. The switch is grounded through circuit 1205 (BK).

Possible Causes
- Circuit 1436 (VT/OG) open, short to ground or voltage
- Parking aid switch
- Parking aid module