Test E: Air Inlet Door Is Inoperative

PINPOINT TEST E: AIR INLET DOOR IS INOPERATIVE

E1:

E2-E3:

E3-E4:

E5-E6:

E7:

Normal Operation
Under normal operation, to rotate the air inlet door actuator, the electronic manual temperature control (EMTC), electronic automatic temperature control (EATC) or dual automatic temperature control (DATC) module supplies voltage to the air inlet door actuator motor through circuit CH208 (GN/OG), and supplies ground through circuit CH207 (BU/GY). To reverse the air inlet door actuator rotation, the DATC/EATC module reverses the voltage and ground circuits.

Possible Causes
- An open, short to voltage, ground or together in circuits CH207 (BU/GY) or CH208 (GN/OG)
- Air inlet door actuator motor
- DATC/EATC module
- EMTC module
- Stuck or bound linkage or door