E: C1095 - ABS Hydraulic Pump Motor Circuit Failure

Pinpoint Test E: DTC C1095 - ABS Hydraulic Pump Motor Circuit Failure
Refer to Vehicle Diagrams Cell 42, Vehicle Dynamic Systems for schematic and connector information.

Normal Operation
The operating voltage required to supply the hydraulic pump motor is in a range between 10 and 16 volts.

Fused battery voltage for the hydraulic pump is supplied to the anti-lock brake system (ABS) module, from battery junction box (BJB) fuse 8 (40A), along circuit SBB36 (GN/RD). Ground for the hydraulic pump is provided through the ABS module along circuit GD123 (BK/GY).

Possible Causes
^ Fuse
^ Circuit open
^ ABS module

PINPOINT TEST E: DTC C1095 - ABS HYDRAULIC PUMP MOTOR CIRCUIT FAILURE

CAUTION: The Flex Probe Kit must be used for all test connections. Use of standard multi-meter probes may damage wiring terminals

E1:

E2-E5: