Window Glass - Rear Quarter

WINDOW GLASS - REAR QUARTER

Removal
1. Remove the rear door window glass.

2. CAUTION: If the rear door window garnish moulding becomes kinked, it is no longer usable and a new moulding must be installed.

Remove the rear door window interior garnish moulding.







3. NOTE: Pull the quarter glass forward to loosen the rear door top glass run assembly.

Remove the rear door top glass run and quarter window glass as an assembly.

Installation







1. NOTE: Make sure to install the quarter window glass into the glass channel.

Position the quarter glass into the door frame.

2. NOTE: For correct rear door glass fit and function, the glass run division bar locator must be fully forward in the rear door header notch.

Install the window division bar.







3. Push the run firmly into the C-pillar flange.







4. Install the run at the B-pillar upper corner.







5. Push the run into the B-pillar flange.







6. Push the run into the header of the door.
7. Install the side glass into the glass run.