Test L: One Turn Signal Lamp Is Inoperative/Always On

PINPOINT TEST L: ONE TURN SIGNAL LAMP IS INOPERATIVE/ALWAYS ON

L1:

L2-L5:

Normal Operation
When the multifunction switch is placed in the LH or RH TURN position, voltage is routed through circuit 3 (LG/WH) or circuit 2 (WH/LB) to the LH or RH front turn signal, respectively. Ground for the turn lamps is provided through circuit 57 (BK). The rear turn lamps utilize the circuitry for the stoplamps.

Possible Causes
- Circuit 2 (WH/LB) open or short to voltage
- Circuit 3 (LG/WH) open or short to voltage
- Circuit 57 (BK) open
- Multifunction switch