Test E: DTC B2292 - Restraint System - Safety Belt Pretensioner Fault

PINPOINT TEST E: DTC B2292 - RESTRAINT SYSTEM - SAFETY BELT PRETENSIONER FAULT

E1:

E2-E3:

E3-E5:

E5-E6:

E7-E9:

E9-E11:

E11-E13:

E14-E15:

Normal Operation
The restraints control module (RCM) checks all of the safety belt retractor pretensioners for faults. If the RCM detects one of the following faults on any of the safety belt retractor pretensioner circuits, it will store diagnostic trouble code (DTC) B2292 in memory and illuminate the air bag indicator.

Fault Conditions
The RCM monitors for the following fault conditions:
- Low resistance
- Circuit open
- Circuit short to voltage
- Circuit short to ground

Possible Causes
A safety belt pretensioner status fault can be caused by:
- damaged wiring, terminals or connectors.
- a faulty safety belt retractor pretensioner.
- RCM is faulted.