Sunroof / Moonroof Track: Service and Repair

LIFTER ARMS

Removal and Installation
1. Remove the roof opening panel glass.







2. Unsnap the roof opening panel trough.
3. Slide the trough and the shield assembly rearward.







4. Move the guide bracket rearward until the lifter pin is at the top of the curved slot and remove the E-clip.
5. Slide the lifter arm feet forward and remove from the track.







6. CAUTION: The lifter pin can only be removed from the top of the slot on the lifter arm.

Rotate the lifter arm upwards, then unsnap it from the lifter pin.

7. To install, reverse the removal procedure.