Test T

PINPOINT TEST T: LFC 15/DTC C1414 - INCORRECT VEHICLE ID

Test T1:

Test T2-T3:

Test T4-T5:

Test T6-T7:

Test T8-T9:

Test T10-T12:

Normal Operation
The restraints control module (RCM) communicates with the front impact severity sensor, driver side impact sensor (if equipped), passenger side impact sensor (if equipped) and the occupant classification sensor (OCS) system to determine if each sensor is at the correct version level for the SRS installed in each vehicle. If the RCM detects a version conflict between the OCS or any of the sensors, it will store diagnostic trouble code (DTC) C1414 in memory and flash lamp fault code (LFC) 15 (or higher priority code if one exists) on the air bag indicator.

Possible Causes
An incorrect vehicle ID fault can be caused by:
- Incorrect sensor for vehicle.
- Incorrect RCM for vehicle.
- Incorrect OCS system for vehicle.
- Wiring, terminals, or connectors.