Test G: LFC 33 and 34/DTC B2292 - Safety Belt Pretensioner Status

G1:

G2:

G3:

G3 - G5:

G5 - G6:

G6 - G7:

G7 - G8:

G8 - G9:

G10 - G11:

G12 - G13:

G14 - G15:

G16 - G17:

G18 - G19:

G20 - G21:

G22:

G23:

G23 - G24:

Normal Operation
The Restraints Control Module (RCM) checks all of the safety belt pretensioners for faults. If the RCM detects one of the following faults on any of the safety belt pretensioner circuits, it will store Diagnostic Trouble Code (DTC) B2292 in memory and flash either Lamp Fault Code (LFC) 33 or 34 depending on the fault (or higher priority code if one exists) on the air bag warning indicator.

Fault Conditions
The RCM monitors for the following fault conditions:
^ Low resistance
^ High resistance or circuit open
^ Circuit short to voltage.
^ Circuit short to ground.

Possible Causes
A safety belt pretensioner status fault can be caused by:
^ Wiring terminals, or connectors.
^ A faulty safety belt pretensioner.
^ RCM is faulted.