Test F: LFC 14/DTC B1921 - Air Bag Diagnostic Monitor Circuit Open

F1:

F2:

F3 - F4:

F5:

F6:

Normal Operation

WARNING: THE TIGHTENING TORQUE OF THE RESTRAINTS CONTROL MODULE (RCM) RETAINING BOLTS IS CRITICAL FOR CORRECT AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) OPERATION.

NOTE: A resistance difference as low as 10 ohms may set the LFC.

The Restraints Control Module (RCM) monitors the resistance between the ground connections at the mounting bracket and the reference ground at C310b pin 10, circuit 57 (BK). If the RCM detects a difference in resistance, it will store Diagnostic Trouble Code (DTC) B1921 in memory and flash Lamp Fault Code (LFC) 14 (or higher priority code if one exists) on the air bag indicator.

Possible Causes
A resistance difference between the RCM bracket ground and harness ground can be caused by:
^ RCM or RCM bracket not securely mounted.
^ Wiring, terminals, or connectors.
^ RCM is faulted.