Test V: LFC 35/DTC B1935 - Passenger Air Bag Squib 1 CKT Resistance Low

V1:

V2 - V3:

V4 - V5:

Normal Operation
The Restraints Control Module (RCM) monitors the passenger air bag squib 1 circuit loop at RCM C310a pins 5 and 6, circuits 607 (LB/OG) and 616 (PK/BK). If the RCM detects a low resistance (less than 0.7 ohms), it will store Diagnostic Trouble Code (DTC) B1935 in memory and flash Lamp Fault Code (LFC) 35 (or higher priority code if one exists) on the air bag indicator.

Possible Causes
A passenger air bag squib 1 circuit low resistance can be caused by:
^ a short between circuits 607 (LB/OG) or 616 (PK/BK).
^ a passenger air bag module internal fault.
^ an RCM internal fault.