Test S: LFC 32/DTC B1932 - Driver Air Bag Squib 1 Circuit Open

S1:

S2 - S3:

S4 - S5:

S6:

Normal Operation
The Restraints Control Module (RCM) monitors the driver air bag squib 1 circuit loop at RCM C310a pins 2 and 3, circuits 614 (GY/OG) and 615 (GY/WR). If the RCM detects an open circuit (greater than 4.6 ohms), it will store Diagnostic Trouble Code (DTC) B1932 in memory and flash Lamp Fault Code (LFC) 32 (or higher priority code if one exists) on the air bag indicator.

Possible Causes
A driver air bag squib 1 circuit open can be caused by:
^ an open or high resistance on circuit 614 (GY/OG) or 615 (GY/WR).
^ a driver air bag module internal fault.
^ an RCM internal fault.