E3 Measure ABS Sensor Resistance

- Measure resistance of suspect sensor at 2-pin connector.

- Flex harness, tap on and shake connectors to locate possible intermittent concern.

1-9 RH Front Sensor
3-10 LH Front Sensor
2-17 RH Rear Sensor
8-16 LH Rear Sensor

- Is resistance greater than 1K ohms and less than 1.5K ohms?

YES -- Go to E7. E7 Check Anti-Lock Brake Control Module

NO -- Leave equipment connected. Go to E4. E4 Check ABS Sensor Wiring For Short