TG97 - Check Sensor Alignment

- Key "OFF".

- Apply parking brake.

- Place transmission in "NEUTRAL".

- Verify the Manual Lever Position (MLP) tool (Rotunda T92P-7010-AH or equivalent) fits in the appropriate slot.

- Does the tool fit properly?

Yes -- Remove tool. Go to TG103. TG103 - Check Sensor Resistance

No -- Place the transmission in Neutral, loosen the two MLP sensor mounting bolts. Move the sensor about to allow insertion of the MLP sensor tool in the appropriate slots. Tighten the two mounting bolts to specification. Remove the tool. Verify shift linkage adjustment. Clear continuous memory. Clearing Diagnostic Trouble Codes

Rerun quick test. Quick Test Appendix (Detailed Testing Instructions)