DR2 - Clear and Attempt to Re-Generate Code 214

- Clear continuous memory. Clearing Diagnostic Trouble Codes

- Start engine.

- Increase rpm to greater than 1500 rpm for 10 seconds. Repeat two times.

- Key "OFF".

- Rerun Key On Engine Running (KOER) Self-Test. Quick Test Appendix (Detailed Testing Instructions)

- Is Continuous Memory Diagnostic Trouble Code (DTC) 214 present?

Yes -- Go to DR3. DR3 - Check CID Circuit Continuity to PCM

No -- DTC 214 is intermittent. Go to DR20. DR20 - Check CID Wiring