F: Magnetic A/C Clutch Does Not Engage

F1 CONTINUITY CHECK

NOTE: If, during this test the 15A fuse blows, A/C clutch or wiring is shorted. Check diode in wiring harness, across A/C clutch in particular. Service short, then test to see if control assembly will turn A/C clutch OFF and ON. If not, replace control assembly.

- Jump LB/BK and LG/P wires Pin 26 and Pin 25 of driver side connector VA.

- Does the A/C clutch engage?

- Yes
Replace control assembly.

- No
Refer to Pinpoint Test E.