X46 - Check Power-to-(Low Speed) Fan Circuit Continuity

- Key Off.

- CCRM disconnected.

- Disconnected cooling fan.

- Measure resistance between the Power-to-(Low Speed) Fan circuit pin at the cooling fan vehicle harness connector and Pins 1 and 2 at the CCRM vehicle harness connector.

- Are both resistances less than 5.0 ohms?

YES -- GO to X47. X47 - Check CCRM

NO -- SERVICE open in Power-to-(Low Speed) Fan circuit between the CCRM and the FANM splice into the circuit. RECONNECT all components. Rerun quick test. Diagnostic Subroutines (DSR) - Extracting Codes