X165 - Check For B+ To Fuel Pump Relay

- Key Off.

- Disconnect CCRM.

- Measure voltage between Pin 11 of the CCRM vehicle harness connector and the battery negative post.

- Is voltage greater than 10.5 volts?

YES -- GO to X166. X166 - Check Power-to-Pump Circuit Continuity

NO -- VERIFY integrity of fuse/fuse link for B(+) supply to CCRM (fuel pump relay). If OK, SERVICE open in B(+) supply to CCRM. RECONNECT all components. RE-EVALUATE symptom.