QC1 - Diagnostic Trouble Code P1000: Check For Other DTCs

This Pinpoint Test should be used only if a DTC P1000 was received in Continuous Memory. Ignore any P1000s in KOEO or KOER. DTC P1000 indicates that all of the On-Board Diagnostics II (OBD II) monitors have not yet been successfully tested.

- Were any other DTCs received with the P1000?

YES -- GO to the Powertrain DTC Chart for Pinpoint Test direction and service the DTC. [1][2]Diagnostic Trouble Code (DTC) Charts

NO -- No EEC-V system faults have been detected. GO to QC2. QC2 - Request to Remove P1000