HE81 - Check VPWR to EVR Solenoid

- Key Off.

- EVR solenoid disconnected.

- Key On, Engine Off.

- Measure voltage between VPWR circuit and chassis ground at the EVR solenoid vehicle harness connector.

- Is EVR VPWR voltage greater than 10.5 volts?

YES -- GO to HE82. HE82 - Measure Resistance Across EVR Solenoid

NO -- SERVICE open in EVR VPWR circuit. RECONNECT all components. Complete PCM reset to clear DTCs. Clearing Diagnostic Trouble Codes

Rerun quick test. Diagnostic Subroutines (DSR) - Extracting Codes