A15

A15 VAPS Harness And Connectors Check (VIP Pin)
- Turn ignition switch to OFF.
- Doors and hood must be closed for proper reading.






- Connect DVOM as shown.
- Measure resistance between Circuit 57 (ground) and VIP Pin 7.
Typical resistance is infinite.
- Measure voltage between Circuit 57 (ground) and VIP Pin 7.
Typical voltage is less than 0.1 volt.
Are resistance and voltage at given values?
Yes
Go to A4. A4 - A6
No
SERVICE harness.
Go to A2. A1 - A3