Anti-Lock Brake System (ABS)

Anti-Lock Brake System (ABS)

Models 129 (CFI Only)

Electrical Test Program - Preparation for Test

- For all test steps performed with ignition ON, the LED must light up, i.e. battery voltage O.K.
- When testing , all other electrical consumers must be turned off. - For ETP 23.0, Step - 25.0 the rear wheels must be raised off the ground.

Note: Unscrew locking tab (arrow, 23 Fig. 13) from ABS-adapter plug 126 589 09 21 00.

Note: The entire ABS test must be performed after any repairs or other work on either the ABS system or the brake system.

Note: It is assumed that the technician is capable of testing switches, relays, lamps, connectors and wires for proper operation without further instructions.

Caution Never drive the vehicle with the ABS-adapter (07) connected!

Special Tools:

Equipment:

Connection Diagram: