Canister Purge Solenoid: Service and Repair

PURGE SOLENOID VALVE REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo]

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable. Removal and Replacement

3. Remove in the order indicated in the table.










4. Install in the reverse order of removal.

Evaporative Hose No.2 Installation Note

1. Install the evaporative hose No.2 and clip as shown in the figure.






Evaporative Hose No.1 Installation Note

1. Install the evaporative hose No.1 and clip as shown in the figure.