Information Display/Multi Information Display Configuration

INFORMATION DISPLAY/MULTI INFORMATION DISPLAY CONFIGURATION

1. Connect the M-MDS (IDS) to DLC-2.






2. After the vehicle is identified, select the following items from the initial screen of the M-MDS (IDS).

- Select the "Module Programming".

3. Then, select items from the screen menu in the following order.
1 Select "Programmable Module Installation".
2 Select "MID".

4. Perform the configuration according to the directions on the screen.

5. Retrieve DTCs by the M-MDS (IDS), then verify that there is no DTC present.

- If a DTC (s) is detected, perform the applicable DTC inspection. Information Display/Multi Information Display - DTC Table