Sunroof / Moonroof Panel: Adjustments

GLASS PANEL ADJUSTMENT

1. Fully close the glass panel.

2. Measure the gap and height between the glass panel and body.






- If not as specified, loosen the glass panel installation screws and reposition the glass panel.

Clearance (4SD)
- a: -2.4-0.2 mm {-0.09-0.01 in}
- b: 0 mm {0 in}
- c: -2.2-0.4 mm {-0.08-0.01 in}
- d: 0 mm {0 in}

Clearance (5HB)
- a: -2.3-0.3 mm {-0.09-0.01 in}
- b: 0 mm {0 in}
- c: -2.3-0.3 mm {-0.09-0.01 in}
- d: 0 mm {0 in}

3. Tighten the installation screws.

4. Insert a plastic card between the weatherstrip and the body of the vehicle. Verify that the sunroof is shut tightly (there is resistance when the plastic card is moved).






- If the sunroof is not shut tightly, readjust by performing Steps 2 and 3.