Front Suspension - Lower Arm Removal/Installation

FRONT LOWER ARM REMOVAL/INSTALLATION

1. Disconnect the front auto leveling sensor link lower side. (Vehicles with AFS) Service and Repair

2. Remove in the order indicated in the table.

3. Install in the reverse order of removal.

4. Inspect the wheel alignment and adjust it if necessary. Front Wheel Alignment










Front Lower Arm Removal Note [LF (RH)]

NOTE:
- When working on the right side of vehicles with LF, move the A/C compressor protector so that the A/C compressor protector does not interfere with the removal of the front lower arm front side bolt.

1. Remove the A/C compressor protector.






2. Remove the front lower arm.

Front Lower Arm Installation Note [LF (RH)]

1. Install the front lower arm.

2. Install the A/C compressor protector.






Front Lower Arm Ball Joint Installation Note

NOTE:
- The bolt insertion direction can be either front or rear of the vehicle, however, keep the insertion direction the same on both the left and right sides of the vehicle.