Removal and Replacement

INSTRUMENT CLUSTER REMOVAL/INSTALLATION

1. Perform the instrument cluster configuration when replacing it. Programming and Relearning

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Front scuff plate (Driver's side) Front Scuff Plate Removal/Installation

b. Front side trim (Driver's side) Front Side Trim Removal/Installation

c. Hood release lever Service and Repair

d. Lower panel Lower Panel Removal/Installation

e. Meter hood Meter Hood Removal/Installation

4. Remove the screw.






5. Remove the instrument cluster.

6. Disconnect the connector.

7. Install in the reverse order of removal.

8. When replacing the instrument cluster of vehicles with the immobilizer system, perform the following procedure:

- Programming and Relearning.

CAUTION:
- The removed instrument cluster should be placed with the display side up to prevent grease from leaking from the meters.