FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2009 >> Mazdaspeed3 L4-2.3L Turbo >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Hydraulic Control Assembly - Antilock Brakes >> Testing and Inspection >> Scan Tool Testing and Procedures >> DSC HU/CM Inspection

DSC HU/CM Inspection




DSC HU/CM INSPECTION

1. Disconnect the DSC HU/CM connector.

2. Connect the negative battery cable.

3. Attach the tester lead to the DSC HU/CM wiring harness-side connector and inspect voltage, continuity, or resistance according to the standard (reference) on the table.

Standard (Reference)






Standard (Reference) (Part 1):





Standard (Reference) (Part 2):






pro multis Credits:Operation CHARM About Operation CHARM