Starting Procedure For On-Board Diagnostic Test Mode [Audio]

STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE [AUDIO]

NOTE:
- All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order Form.

1. Turn the ignition switch to the ACC or ON position.

2. While pressing the POWER/VOLUME button, simultaneously press the MEDIA button and the CLOCK button for 2 s or more.










NOTE:
- If several DTCs are in the memory, they can be displayed using the SEEK button.

3. To stop the on-board diagnostic test mode, turn the ignition switch to the LOCK position.