Removal

WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATOR MOTOR (for Front Door): REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System (for HDD):
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE DOOR INSIDE HANDLE BEZEL PLUG Disassembly

3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY Disassembly

4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH Disassembly

5. REMOVE FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH Disassembly

6. REMOVE COURTESY LIGHT ASSEMBLY Disassembly

7. REMOVE FRONT DOOR TRIM COVER LH Disassembly

8. REMOVE DOOR FRAME GARNISH LH Disassembly

9. REMOVE FRONT DOOR SERVICE HOLE COVER LH Disassembly

10. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY LH Disassembly

11. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY LH Disassembly

12. REMOVE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH Disassembly